Verifying Parameter Changes: Verify Menu - YASKAWA L1000A Technical Manual

11. The display automatically returns to the screen shown in Step 4.
12.
Press as many times as necessary to return to the initial display.

◆ Verifying Parameter Changes: Verify Menu

The Verify Menu lists edited parameters from the Programming Mode or as a result of Auto-Tuning. The Verify Menu
helps determine which settings have been changed, and is particularly useful when replacing a drive. If no settings have
been changed, the Verify Menu will read "None". The Verify Menu also allows users to quickly access and re-edit any
parameter settings that have been changed.
Note: The Verify Menu will not display parameters from the A1 group (except for A1-02) even if those parameters have been changed
from their default settings.
The following example is a continuation of the steps above. Here, parameter C1-02 is accessed using the Verify Menu,
and is changed again from 1.50 s to 2.50 s.
The steps below are an example of how to check the list of edited parameters:
1. Turn on the power to the drive. The initial display appears.
2.
Press or until the display shows the top of the Verify Menu.
Press to enter the list of parameters that have been edited from their original default settings.
3.
If parameters other than C1-02 have been changed, use
4.
Press to access the setting value. Left digit flashes.
YASKAWA ELECTRIC SIEP C710616 38A YASKAWA AC Drive L1000A Technical Manual
Step
Step
or to scroll until C1-02 appears.
4.3 The Drive and Programming Modes
Display/Result
-PRMSET-
C1-02=
(0.0~600.00)
"1.50 sec"
- MODE -
Speed Ref (OPR)
U1-01= 0.00%
U1-02= 0.00%
U1-03= 0.00A
FWD
Display/Result
- MODE -
Speed Ref (OPR)
U1-01= 0.00%
U1-02= 0.00%
U1-03= 0.00A
- MODE -
Modified Consts
X Parameters
HELP
- VERIFY - PRG
Decel Ramp 1
C1-02
(0.0~600.00)
Home
- VERIFY - PRG
Decel Ramp 1
C1-01=002.50sec
(0.0~600.00)
Home
PRG
2.50 sec
FWD
DRV Rdy
RSEQ
LREF
DRV Rdy
RSEQ
LREF
FWD
PRG
Modified
FWD DATA
4
Rdy
= 2.50sec
"1.50sec"
FWD DATA
Rdy
"1.50sec"
FWD DATA
93