D.2 European Standards - YASKAWA L1000A Technical Manual

D.2 European Standards

D.2 European Standards
Figure D.1
The CE mark indicates compliance with European safety and environmental regulations. It is required for engaging in
business and commerce in Europe.
European standards include the Machinery Directive for machine manufacturers, the Low Voltage Directive for
electronics manufacturers, and the EMC guidelines for controlling noise.
This drive displays the CE mark based on the EMC guidelines and the Low Voltage Directive.
• Low Voltage Directive: 2006/95/EC
• EMC Guidelines: 2004/108/EC
Devices used in combination with this drive must also be CE certified and display the CE mark. When using drives
displaying the CE mark in combination with other devices, it is ultimately the responsibility of the user to ensure
compliance with CE standards. After setting up the device, verify that conditions meet European standards.
◆ CE Low Voltage Directive Compliance
This drive has been tested according to European standard IEC61800-5-1, and it fully complies with the Low Voltage
Directive.
To comply with the Low Voltage Directive, be sure to meet the following conditions when combining this drive with
other devices:
■
Area of Use
Do not use drives in areas with pollution higher than severity 2 and overvoltage category 3 in accordance with IEC664.
■
Installing Fuses on the Input Side
Model
CIMR-L
2A0018
2A0025
2A0033
2A0047
2A0060
2A0075
2A0085
2A0115
2A0145
2A0180
2A0215
2A0283
2A0346
2A0415
4A0009
4A0015
4A0018
4A0024
414
Figure D.1 CE Mark
Table D.1 Recommended Input Fuse Selection
Model
Three-Phase 200 V Class
FWH-90B
FWH-100B
FWH-200B
FWH-200B
FWH-200B
FWH-300A
FWH-300A
FWH-350A
FWH-400A
FWH-400A
FWH-600A
FWH-700A
FWH-800A
FWH-1000A
Three-Phase 400 V Class
FWH-90B
FWH-80B
FWH-100B
FWH-125B
YASKAWA ELECTRIC SIEP C710616 38A YASKAWA AC Drive L1000A Technical Manual
Fuse Type
Manufacturer: Bussmann
Fuse Ampere Rating (A)
90
100
200
200
200
300
300
350
400
400
600
700
800
1000
90
80
100
125