Key Modify Clear; Key Operations (Key Control Block); Selecting The Bank And Keyer - Sony MVS-8000X User Manual

For details, see "Enabling the Input Signal and AUX Bus
Color Corrector" (page 447).
1
Open the M/E-1 >Key1 >Video Process menu (1117).
2
Press [Video Process], turning it on.
3
Set the following parameters.
No. Parameter Adjustment
1 Video Gain Overall gain of video signal
2 Y Gain Luminance signal gain
3 C Gain Chrominance gain
4 Hue Delay Hue delay
5 Black Level Luminance black level
To return the parameters to their default settings
Press [Unity].

Key Modify Clear

Press [Default Recall] at the lower left of the menu display,
turning it on, then press a VF button (VF1 to VF4) to return
the corresponding key settings to their initial status.
For details about initial status, see "Power-On (Startup)
State Selection" (page 397).
Key Operations (Key
Control Block)
Setting buttons display area
Delegation buttons
Setting buttons
To make settings for keys on the key control block, select
a bank and keyer using the delegation buttons.
The key type selection buttons, key fill/key source
selection buttons, and modifier buttons are assigned to the
setting buttons. The functions set in each button can be
viewed in the setting buttons display section.
Different functions are assigned to the shifted state and
unshifted state of the setting buttons. To select the shifted-
state function, press the [SHFT] button, turning it on.
Setting parameters
If there are parameters available for the selected function,
the set value for each item appears on the display.
The parameters are adjusted using five adjustment knobs
similar to the menu panel (numbered 1 to 5 from the top).
When there are six or more parameters, the [MORE]
button is lit amber. Press the [MORE] button, turning it on
green, to display the 6th and subsequent parameters
(parameter group [2/2]).
You can set a parameter when the button is lit green. If the
button for the parameter you want to set is lit amber, press
the button, turning it on green, and then set the value.

Selecting the Bank and Keyer

1
Press the delegation button for the target bank (M/E-1
to M/E-5, P/P), turning it on.
112
Adjustment knobs
Display
MORE button
SHFT button
Key control block