Spot Color Adjustment - Sony DVS-9000 User Manual

Knob
1
2
3
• In color modify mode
Knob
1
2
3
To return the parameters to their default settings
In the <Luminance Process> group, press [Unity].
Masking a part of luminance processing
In the <Luminance Mask> group, press [Mask1] or [Mask2], turning it on, then
carry out the same procedure as in "Masking a part of the primary color
correction" (page 519).

Spot Color Adjustment

Note
When secondary color correction is enabled in the setup settings, this function
is disabled. (See "Switching the color correction function" (page 293).)
Adjusting the color of the specified region (key)
1
In the CCR menu, press VF1 'CCR1' and HF6 'Spot CCR/Output.'
The Spot CCR/Output menu appears.
2
In the <Spot CCR> group, press [Spot CCR], turning it on.
3
In the <Auto> group, press [Sample Mark], turning it on.
Note
When [Sample Mark] is on, the effects of color adjustment outside the
region of spot color adjustment (see page 527) and output video processing
(see page 527) are temporarily disabled.
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Parameter Adjustment
Luminance Luminance
C Gain Chrominance signal gain
Hue Delay Hue delay
Setting values
–100.00 to +100.00
0.00 to 100.00
359.99 to 0.00
Setting values
–100.00 to +100.00
0.00 to 200.00
–180.00 to +180.00
Color Corrector Functions
525