Clearing of film jams
A film jam can be situated either:
• In the input tray section.
• In the top section.
Jams can be caused by:
• Opening the top cover or input tray while a film is actually being printed.
• Loading films incorrectly.
1
Film feed jams (clearing from the input tray)
1.
Film transport jams (clearing from the top section)
2.
Figure 3: Overview of sections
Topics:
•
Film input tray jams
•
Film transport jams (clearing from the top)
•
Unauthorized opening of the printer
2
WARNING:
Never reuse a jammed film. This may cause damage to the
thermal head and/or dust problems.
Drystar 5301, Drystar 5302 | Problem solving | 109
2830F EN 20210520 0952