Saving The Configuration Settings - AGFA Drystar 4500 Reference Manual

Saving the configuration settings

Each time the settings have been changed and confirmed, an automatic back-
up of the new configuration is made on the hard disk. You will also be asked
to create a back-up floppy.
It is also possible (and recommended) to regularly make a back-up of the
printer settings to ensure safe restoring of the values when required.
Save configuration procedure
Press the Key-operator key to enter the key-operator mode.
1
On the key-operator main menu, press the Down key three times, followed by
2
the Confirm key to select 'Save configuration'.
The 'Save configuration' screen is displayed:
Insert an empty floppy disk.
3
The drive is located at the rear of the printer.
An empty, formatted and IBM-compatible (2HD) floppy disk is required.
2800E EN 20050215
D 4500 R
RYSTAR EFERENCE MANUAL
Advanced operation (key-operator mode)
99