Siemens bt300 Operator's Manual page 49

Structure Parameter
P3.3.13 Preset Freq 2
P3.3.14 Preset Freq 3
P3.3.15 Preset Freq 4
P3.3.16 Preset Freq 5
Siemens Industry, Inc.
Building Technologies
Unit Min
Hz Parameter Parameter
P1.8 or P1.9 or P3.3.2
P3.3.1
Hz Parameter Parameter
P1.8 or P1.9 or P3.3.2
P3.3.1
Hz Parameter Parameter
P1.8 or P1.9 or P3.3.2
P3.3.1
Hz Parameter Parameter
P1.8 or P1.9 or P3.3.2
P3.3.1
Siemens BT300 HVAC Drive
Chapter 4 - Parameters and Menu Structure
Max Default
15 106
20 126
25 127
30 128
Parameters (M3)
ID Description
Defines the frequency to be used
when the following occurs:
1. PresetFreqMode (P3.3.10) is set to
Binary Coded and
Preset Freq Sel0 (P3.5.1.15) is de-
activated.
Preset Freq Sel1 (P3.5.1.16) is
activated.
Preset Freq Sel2 (P3.5.1.17) is de-
activated.
2. PresetFreqMode (P3.3.10) is set to
Number of Inputs &
Preset Freq Sel0 (P3.5.1.15) is de-
activated.
Preset Freq Sel1 (P3.5.1.16) is
activated.
Preset Freq Sel2 (P3.5.1.17) is de-
activated.
Defines the frequency to be used
when the following occurs:
1. PresetFreqMode (P3.3.10) is set to
Binary Coded &
Preset Freq Sel0 (P3.5.1.15) is
activated.
Preset Freq Sel1 P(3.5.1.16) is
activated.
Preset Freq Sel2 (P3.5.1.17) is de-
activated.
2. PresetFreqMode (P3.3.10) is set to
Number of Inputs &
Preset Freq Sel0 (P3.5.1.15) is de-
activated.
Preset Freq Sel1 (P3.5.1.16) is de-
activated.
Preset Freq Sel2 (P3.5.1.17) is
activated.
Defines the frequency to be used
when the following occurs:
1. PresetFreqMode (P3.3.10) is set to
Binary Coded &
Preset Freq Sel0 (P3.5.1.15) is de-
activated.
Preset Freq Sel1 (P3.5.1.16) is de-
activated.
Preset Freq Sel2 (P3.5.1.17) is
activated.
Defines the frequency to be used
when the following occurs:
1. PresetFreqMode (P3.3.10) is set to
Binary Coded &
Preset Freq Sel0 (P3.5.1.15) is
activated.
Preset Freq Sel1 (P3.5.1.16) is de-
activated.
Preset Freq Sel2 (P3.5.1.17) is
activated.
49 | 180
DPD01809
2016-06-07