Fieldbus Data Monitoring (M2.8) - Siemens bt300 Operator's Manual

Chapter 4 - Parameters and Menu Structure
Monitor Menu (M2)
Table 10: Multi-Pump Monitoring.
Structure Parameter
M2.6.1 Motors Running
M2.6.2 Autochange

Fieldbus data monitoring (M2.8)

The Fieldbus Data monitoring values are shown for debugging purposes. See
The Fieldbus Data monitoring values are presented in the following table:
Structure Parameter
M2.8.1 FB Control Word
M2.8.2 FB Speed Reference
M2.8.3 FB Data In 1
M2.8.4 FB Data In 2
M2.8.5 FB Data In 3
M2.8.6 FB Data In 4
M2.8.7 FB Data In 5
M2.8.8 FB Data In 6
M2.8.9 FB Data In 7
M2.8.10 FB Data In 8
M2.8.11 FB Status Word
M2.8.12 FB Speed Actual
M2.8.13 FB Data Out 1
M2.8.14 FB Data Out 2
M2.8.15 FB Data Out 3
M2.8.16 FB Data Out 4
M2.8.17 FB Data Out 5
M2.8.18 FB Data Out 6
M2.8.19 FB Data Out 7
M2.8.20 FB Data Out 8
34 | 180
Siemens Industry, Inc.
Building Technologies
Unit ID
30 The number of motors running at the moment when Multi-Pump functionality is used.
1114 If an autochange is requested,
and the drive is waiting until the rest of the autochange criteria is fulfilled. For example,
output frequency of controlled drive and number of running motors.
Table 11: Fieldbus Data Monitoring.
Unit ID
874 Fieldbus control word used by application in bypass mode/format. Depending on the
fieldbus type or profile the data might be modified before sent to the application.
Hz 875 Speed reference scaled between minimum and maximum frequency at the moment it
was received to the application. Minimum and maximum frequency might have been
changed after the reference was received without affecting the reference.
876 Raw value of process data in 32-bit signed format.
877 Raw value of process data in 32-bit signed format.
878 Raw value of process data in 32-bit signed format.
879 Raw value of process data in 32-bit signed format.
880 Raw value of process data in 32-bit signed format.
881 Raw value of process data in 32-bit signed format.
882 Raw value of process data in 32-bit signed format.
883 Raw value of process data in 32-bit signed format.
864 Fieldbus status word sent by application in bypass mode/format. Depending on the
fieldbus type or profile the data might be modified before sent to the fieldbus.
% 865 Actual speed in %. 0 and 100% corresponds to minimum and maximum frequency
respectively. This is continuously updated depending on the momentary min and max
frequency and output frequency.
866 Raw value of process data out 32-bit signed format.
867 Raw value of process data out 32-bit signed format.
868 Raw value of process data out 32-bit signed format.
869 Raw value of process data out 32-bit signed format.
870 Raw value of process data out 32-bit signed format.
871 Raw value of process data out 32-bit signed format.
872 Raw value of process data out 32-bit signed format.
873 Raw value of process data out 32-bit signed format.
Siemens BT300 HVAC Drive
Description
requested
means that the autochange time has elapsed
Fieldbus Data Mapping (M3.6).
Description
DPD01809
2016-06-07