Siemens bt300 Operator's Manual page 48

Chapter 4 - Parameters and Menu Structure
Parameters (M3)
Structure Parameter
P3.3.6 Keypad
Reference
P3.3.7 Keypad Direction
P3.3.8 KeypadRefCopy
P3.3.9 FieldbusCtrl Ref
P3.3.10 PresetFreqMode
P3.3.11 Preset Freq 0
P3.3.12 Preset Freq 1
48 | 180
Siemens Industry, Inc.
Building Technologies
Unit Min
Hz 0 Parameter P3.3.2
Forward Reverse
Copy Ref No Copying
Run
PresetFreq0 Motor Pot Ref
Binary Coded Number of inputs
Hz Parameter Parameter
P1.8 or P1.9 or P3.3.2
P3.3.1
Hz Parameter Parameter
P1.8 or P1.9 or P3.3.2
P3.3.1
Siemens BT300 HVAC Drive
Max Default
0 184
Forward 123
Copy Ref 181
Run
Fieldbus 122
Binary Coded 182
5 180
10 105
ID Description
Defines the frequency reference
when in HAND (keypad) mode of
operation.
Defines the motor rotation when in
HAND (keypad) mode of operation
0 = Forward
1 = Reverse
Defines the function of Run State &
Reference copy when switching to
Keypad control.
0 = Copy Reference
1 = Copy Ref & Run State
2 = No Copy
Defines the location of Fieldbus
Control Reference:
1 = Preset Freq 0
2 = Keypad Reference
3 = Fieldbus
4 = AI1
5 = AI2
6 = AI1+AI2
7 = PID 1 Reference
8 = Motor Potentiometer
Defines the preset frequency mode to
be used:
0 = Binary Coded
1 = Number of inputs. Preset freq
selected according to number of
digital inputs.
Defines the frequency to be used
when I/O A Ctrl Ref (P3.3.3), I/O B
Ctrl Ref (P3.3.4), Keypad Ctrl Ref
(P3.3.5) and/or FieldbusCtrl Ref
(P3.3.9) is set to a value of Preset
Freq 0.
Defines the frequency to be used
when the following occurs:
1. PresetFreqMode (P3.3.10) is set to
Binary Coded and
Preset Freq Sel0 (P3.5.1.15) is
activated.
Preset Freq Sel1 (P3.5.1.16) is de-
activated.
Preset Freq Sel2 (P3.5.1.17) is de-
activated.
2. PresetFreqMode (P3.3.10) is set to
Number of Inputs &
Preset Freq Sel0 (3.5.1.15) is
activated.
Preset Freq Sel1 (3.5.1.16) is de-
activated.
Preset Freq Sel2 (3.5.1.17) is de-
activated.
DPD01809
2016-06-07