Siemens bt300 Operator's Manual page 130

Chapter 4 - Parameters and Menu Structure
I/O and Hardware (M5)
Instance ID Object Name
BV_21 FBCNTRLBIT10
BV_22 FBCNTRLBIT11
BV_23 FBCNTRLBIT12
BV_24 FBCNTRLBIT13
BV_25 FBCNTRLBIT14
BV_26 FBCNTRLBIT15
BV_27 COAST2STOP
BV_28 RAMP2STOP
BV_29 QUICK STOP
BV_30 FB CONTROL
BV_31 FB REFERENCE
BV_32 INTERLOCK 1
BV_33 INTERLOCK 2
BV_34 ENERGY OPT
BV_35 AUTO RESET
BV_36 FIREMODESTAT
BV_37 BYP ACTIVE
BV_38 BYP RUNNING
BV_39 REM SAFETY 1
BV_40 REM SAFETY 2
BV_41 REM SAFETY 3
BV_42 REM SAFETY 4
BV_43 REM SAFETY 5
BV_44 REM SAFETY 6
BV_45 REM SAFETY 7
BV_46 REM SAFETY 8
BACnet MS/TP Protocol Quick Setup
For monitoring objects through the BACnet MS/TP protocol, complete the following steps:
1. Select: Main Menu > I/O and Hardware (M5) > RS-485 (M5.8) > Common Settings (M5.8.1) > Protocol
(p5.8.1.1) > Edit.
2. Select BACnet MSTP from the list and press the
3. Select: Main Menu > I/O and Hardware (M5) > RS-485 (M5.8) > BACnet MSTP (M5.8.3) > Parameters
(M5.8.3.1) > Baud Rate (P5.8.3.1.1) > Edit.
4. Enter the desired baud rate and press the
130 | 180
Siemens Industry, Inc.
Building Technologies
Description
Fieldbus Control Word Bit 10
Fieldbus Control Word Bit 11
Fieldbus Control Word Bit 12
Fieldbus Control Word Bit 13
Fieldbus Control Word Bit 14
Fieldbus Control Word Bit 15
Command to issue a Coast to
Stop
Command to issue a Ramp to
Stop
Command to issue a Quick Stop
Activates Fieldbus Control.
Activates Fieldbus Reference.
Run Interlock 1
Run Interlock 2
Energy Optimization
Auto Reset
Fire Mode Active
button.
Siemens BT300 HVAC Drive
Active/Inactive Text
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
YES/READY
YES/READY
YES/READY
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ACTIVE/INACTV
ACTIVE/INACTV
YES/NO
FAULT/NOFLT
FAULT/NOFLT
FAULT/NOFLT
FAULT/NOFLT
FAULT/NOFLT
FAULT/NOFLT
FAULT/NOFLT
FAULT/NOFLT
button.
PV Access Menu
C
C
C
C
C
C
W
W
W
C
C
R P3.5.1.12
R P3.5.1.13
R P3.1.2.18
R P3.10.1
R
R
R
R
R
R
R
R
R
R
R
DPD01809
2016-06-07