User Settings (M6); Parameter Backup (M6.5) - Siemens bt300 Operator's Manual

Chapter 4 - Parameters and Menu Structure

User Settings (M6)

4. Set to a value of 1.
5. Select:
Main Menu > I/O and Hardware (M5) > RS-485 (M5.9) > BACnetMSTP (M5.9.3) > Parameters (M5.9.3.1) >
Instance Number (M5.9.3.1.4) > Edit.
6. Enter the desired device instance number between 0 and 4194303.
For commanding of Run/Stop using BACnet/IP complete the following steps (in addition to the
Monitoring steps above):
1. Select:
Main Menu > Quick Setup (M1) > Ctrl. Place Auto (M1.15) > Edit.
2. Select FieldBusCTRL
For commanding Speed Reference using BACnet/IP complete the following steps (in addition to
the monitoring steps above):
1. Select:
Main Menu > Quick Setup (M1) > I/O A Ctrl Ref (M1.10) > Edit.
2. Select Fieldbus.
User Settings (M6)
User settings (M6) are drive- and keypad-specific settings. This section contains the following information:
Menu and Parameter Group
Language Selection (P6.1)

Parameter Backup (M6.5)

Parameter Compare (M6.6)
Drive Name (P6.7)
User settings (M6) contain the following parameters:
Structure Parameter
P.1 Language Selections
P6.5 Parameter Backup
P6.6 Parameter Compare
P6.7 Drive Name
Parameter Backup (M6.5)
The parameterization can be used to restore the drive to factory default values, stored in and restored from keypad,
backup set 1 (in the drive), and backup set 2 (in the drive).
162 | 180
Siemens Industry, Inc.
Building Technologies
Table 134: User Settings.
Selection of the language the keypad is displayed in.
Backup and restore functions for the drive.
Parameter comparison to defaults, or backup files.
User-defined name for the drive.
ID
802 Selection of the language for the keypad use. This varies depending upon the language
package installed.
Parameter Backup (M6.5).
See
Parameter Backup (M6.5).
See
2528 User-defined name for the drive. Default value is the serial number of the drive.
Siemens BT300 HVAC Drive
Description
Description
DPD01809
2016-06-07