Siemens bt300 Operator's Manual page 125

Instance ID Object Name
AI_0 ANALOG IN 1
AI_1 ANALOG IN 2
Binary Inputs (BI)
The binary inputs support the following BACnet properties:
● Active Text
● Event State
● Inactive Text
● Object Identifier
● Object Name
● Object Type
● Out of Service
● Present Value
● Status Flags
Instance ID Object Name
BI_0 DI1 STATUS
BI_1 DI2 STATUS
BI_2 DI3 STATUS
BI_3 DI4 STATUS
BI_4 DI5 STATUS
BI_5 DI6 STATUS
Analog Outputs (AO)
The analog outputs support the following BACnet properties:
● Event State
● Object Identifier
● Object Name
● Object Type
● Out of Service
● Present Value
● Priority Array
● Relinquish Default
● Status Flags
● Units
Instance ID Object Name
AO_0 ANALOG OUT 1
Siemens Industry, Inc.
Building Technologies
Table 97: BACnet Analog Inputs.
Description
This is the value of Analog Input 1
This is the value of Analog Input 2
Table 98: BACnet Binary Inputs.
Description
Status of digital input 1 signal.
Status of digital input 2 signal.
Status of digital input 3 signal.
Status of digital input 4 signal.
Status of digital input 5 signal.
Status of digital input 6 signal.
Table 99: BACnet Analog Outputs.
Description
Analog output command, if
configured.
Siemens BT300 HVAC Drive
Chapter 4 - Parameters and Menu Structure
Units PV Access
PCT R
PCT R
Active/Inactive Text
ON/OFF R
ON/OFF R
ON/OFF R
ON/OFF R
ON/OFF R
ON/OFF R
Units PV Access
PCT C
I/O and Hardware (M5)
Menu
M2.2.13
M2.2.14
PV Access Menu
M5.1.1
M5.1.2
M5.1.3
M5.1.4
M5.1.5
M5.1.6
Menu
M2.2.15
125 | 180
DPD01809
2016-06-07