Using The Keypad - Siemens bt300 Operator's Manual

● ID: Indicates the parameter ID (if applicable) for the parameter selected.
● Tree: Indicates the menu, sub-menu, or parameter tree structure number.
● Group: Indicates the group, sub-group, or parameter name that is in the list. The highlight represents the
selected item.
● Count: Indicates the count of items listed in the group or sub-group.
The data on the control keypad are arranged in menus and sub-menus. Use the UP
move between the menus. Enter the group/item by pressing the
pressing the Back/Reset

Using the Keypad

This section covers the editing of parameter values, resetting of faults, accessing the control page, obtaining help
related to parameters, and configuring the items for the Favorites menu.
Editing Values
Change the value of a parameter by using the following procedure:
1. Locate the parameter. See
2. Highlight the parameter and complete one of the following:
Press the button to enter the parameter choice menu, which contains Edit, Help, and Add To (or
Remove From) Favorites. Highlight Edit and press the
Press the button to enter directly into the parameter editing mode.
3. Set the new value using the
Siemens Industry, Inc.
Building Technologies
NOTE:
This field always shows standard English digits regardless of the language selected
by Language Selections (P6.1).
button.
NOTES:
1. Some parameters cannot be changed when the drive is in the Run state.
2. Some parameters require a power cycle to implement changes.
Chapter 4
for parameter details.
or buttons.
NOTE:
You can move from digit-to-digit using the
numerical.
Siemens BT300 HVAC Drive
Chapter 1 - User Interfaces on Siemens BT300
button and return to the previous level by
button a second time.
or buttons if the value is
Drive Keypad
and DOWN arrows to
13 | 180
DPD01809
2016-06-07