Total Counters (M4.6); Trip Counters (M4.7) - Siemens bt300 Operator's Manual

Total Counters (M4.6)

Total Counters contain all the totalized counters for energy usage, run time, power on time, and even start
command count. These setting are not resettable.
The total counters are presented in the following table:
Structure Parameter
M4.6.1 Energy Counter
M4.6.3 Operating Time
M4.6.7 Run Time
M4.6.11 Power On Time
M4.6.15 Start Cmd Counter

Trip Counters (M4.7)

Trip Counters contain the reset objects for energy usage and time clock, and are presented in the following table:
Structure Parameter
M4.7.1 Energy Counter
M4.7.3 Operating Time
Siemens Industry, Inc.
Building Technologies
Table 75: Total Counters.
Unit Min
Varies
y d hh:mm
y d hh:mm
y d hh:mm
Table 76: Trip Counters.
Unit Min
Varies
y d hh:mm
Siemens BT300 HVAC Drive
Chapter 4 - Parameters and Menu Structure
Max Default ID
2291
2298
2293
2295
Max Default ID
2296
2299
Diagnostics (M4)
Description
The amount of energy taken from
the supply.
NOTE: This is not resettable.
Highest energy unit that the display
shows is MW (megawatts). If the
counter scrolls past 999.9 MW, no
unit will display.
Energy Counter (P4.7.1)
See for
resettable version.
Displays the control units operating
time in years, days, hours:minutes.
NOTE: This is not resettable.
See Operating Time (P4.7.3 ) for
resettable version.
Displays the motor run time in
years, days, hours:minutes
Displays the power on time in
years, days, hours:minutes
Displays the number of times the
power unit has been started.
Description
The amount of energy taken from
the supply.
NOTE: This is resettable. Highest
energy unit that the display shows
is MW (megawatts). If the counter
scrolls past 999.9 MW, no unit will
display.
Energy Counter (M4.6.1)
See for
non-resettable version.
Displays the control units operating
time in years, days, hours:minutes.
NOTE: This is resettable.
Operating Time (M4.6.3)
See for
non-resettable version.
111 | 180
DPD01809
2016-06-07