Operating Pattern And Menu Structure - Siemens SINAMICS G120 Manual

Operating pattern
To better understand the functionality of the buttons, you should be acquainted with the oper-
ating pattern: the Basic Operator Panel gives you access to a parameter list, which ranges from
0 to 9,899. Stored behind the parameters are parameter values that control the operation of the
motor. However, not all the parameters are assigned.
General procedure for accessing parameters with the BOP-2
• Press ESC to enter the menu selection.
• Use the UP and DOWN buttons to move the menu bar to the word "Parameter" and press OK.
• Press OK to select the standard user parameters.
• The first number in the list appears on the left side of the screen: r2 (r stands for
• On the right side of the screen the value of the selected parameter is shown.
• Press the UP button to access the next parameter.
• For example, P3 appears (P means that you can change the value of
• Adjust the value by pressing OK and using the UP and DOWN buttons.
• Confirm the adjusted value by pressing OK.
Operator Panels BOP-2 and IOP:
20
Parameter
r0000
r0002
P0003
P0004
P0005
P9899
read only and means that you can only read this value but cannot change it).
this parameter).
ESC
Working with BOP-2
Value / Index
0
0
1
0
in000
in001
in002
OK
OK
OK
Index value
21
0
0
If you want to change
any parameter using the
parameter list, you are
requested to choose a filter
level (Standard or Expert).
The standard level limits
the available parameters in
OK order to increase the speed
OK
while browsing through the
parameters with the BOP-2.
This also limits the chance
of changing any possibly
dangerous parameters. The
expert level gives access to
all parameters.
Note