Siemens bt300 Operator's Manual page 67

Structure Parameter
P3.6.1 FB DataOut 1 Sel
P3.6.2 FB DataOut 2 Sel
P3.6.3 FB DataOut 3 Sel
P3.6.4 FB DataOut 4 Sel
P3.6.5 FB DataOut 5 Sel
P3.6.6 FB DataOut 6 Sel
P3.6.7 FB DataOut 7 Sel
Siemens Industry, Inc.
Building Technologies
Table 43: Fieldbus Data Mapping Settings.
Unit Min Max
0 35000
0 35000
0 35000
0 35000
0 35000
0 35000
0 35000
Siemens BT300 HVAC Drive
Chapter 4 - Parameters and Menu Structure
Default ID
Output Frequency (1) 852
Motor Speed (2) 853
Current (45) 854
Torque (4) 855
Power (5) 856
Voltage (6) 857
DC Link (7) 858
Parameters (M3)
Description
Defines the data to be sent to the
fieldbus as FB DataOut 1. This is
chosen with the parameter ID. The
data is scaled to unsigned 16-bit
format according to the format on
the keypad.
For example, this parameter is set
to a value of 1 which is Output
Frequency (P2.2.1) ID 1. If the
keypad is displaying 25.5 Hz, then
the data over the FB will be 255.
BACnet = AV_20
P1 = Subpoint 50
Defines the data to be sent to the
fieldbus as FB DataOut 2. See
FBDataOut 1 Sel (P3.6.1) for
further details.
BACnet = AV_21
P1 = Subpoint 51
Defines the data to be sent to the
fieldbus as FB DataOut 3. Refer to
FBDataOut 1 Sel (P3.6.1) for
further details.
BACnet = AV_22
P1 = Subpoint 52
Defines the data to be sent to the
fieldbus as FB DataOut 4. See
FBDataOut 1 Sel (P3.6.1) for
further details.
BACnet = AV_23
P1 = Subpoint 53
Defines the data to be sent to the
fieldbus as FB DataOut 5. Refer to
FBDataOut 1 Sel (P3.6.1) for
further details.
BACnet = AV_24
P1 = Subpoint 54
Defines the data to be sent to the
fieldbus as FB DataOut 6. See
FBDataOut 1 Sel (P3.6.1) for
further details.
BACnet = AV_25
P1 = Subpoint 55
Defines the data to be sent to the
fieldbus as FB DataOut 7. See
FBDataOut 1 Sel (P3.6.1) for
further details.
BACnet = AV_26
P1 = Subpoint 56
DPD01809
2016-06-07
67 | 180