Siemens bt300 Operator's Manual page 68

Chapter 4 - Parameters and Menu Structure
Parameters (M3)
Structure Parameter
P3.6.8 FB DataOut 8 Sel
P3.6.9 FB Run Enable
For example, to provide the PID1 Feedback over the fieldbus. Complete the following:
Set Fieldbus Data Out 1 Selection (P3.6.1) can be set to a value of 21 [which represents PID Feedback (P2.4.2)].
68 | 180
Siemens Industry, Inc.
Building Technologies
Unit Min Max
0 35000 Last Fault (37)
Disabled Enabled Enabled
Siemens BT300 HVAC Drive
Default ID
859 Defines the data to be sent to the
fieldbus as FB DataOut 8. See
FBDataOut 1 Sel (P3.6.1) for
further details.
BACnet = AV_27
P1 = Subpoint 57
1829 Defines the run enable when in
fieldbus control.
NOTE: When fieldbus is not in use,
see Run Enable (P3.5.1.11)
Description
DPD01809
2016-06-07