Software Info (M4.8); I/O And Hardware (M5); Basic I/O (M5.1) - Siemens bt300 Operator's Manual

Chapter 4 - Parameters and Menu Structure

I/O and Hardware (M5)

Software Info (M4.8)

Software Info contains software/firmware specific information. Software Package (M4.8.1) is vital information for
Technical Support when troubleshooting issues.
The software info settings are presented in the following table:
Structure Parameter
M4.6.1 Software Package
M4.8.4 System Load
M4.8.5 Application Name
M4.8.6 Application ID
M4.8.7 Application Ver.
I/O and Hardware (M5)
Under this menu are the following sections related to the I/O and hardware of the drive:
Menu and Parameter Group
Basic IO (M5.1)
Slot C (M5.2)*
Slot D (M5.3)*
Slot E (M5.4)*
Real Time Clock (M5.5)
Power Unit Settings (M5.6)
Keypad (M5.7)
RS-485 (M5.8)
Ethernet (M5.9)
* If an option board has been installed in the slot, the name of this menu will change to the card name (such as,
OPTB5).

Basic I/O (M5.1)

Displays the status of the Basic Slot A and Slot B I/O. See
the Basic I/O.
Structure Parameter
M5.1.1 Digital Input 1
M5.1.2 Digital Input 2
M5.1.3 Digital Input 3
M5.1.4 Digital Input 4
M5.1.5 Digital Input 5
112 | 180
Siemens Industry, Inc.
Building Technologies
Table 77: Software Information Settings.
Unit Min Max
% 0 -100
Table 78: I/O and Hardware.
Provides status of I/O found on Slot A and Slot B.
Provides status of I/O found on Slot C.
Provides status of I/O found on Slot D.
Provides status of I/O found on Slot E.
Configuration and status of the real time clock.
Configuration and status of the fan and sine filter.
Configuration of keypad specific information.
Configuration and status of the RS-485 type fieldbus protocols.
Configuration and status of the Ethernet type fieldbus protocols.
Table 79: Basic Slot A and Slot B I/O.
Unit Min
OFF ON
OFF ON
OFF ON
OFF ON
OFF ON
Siemens BT300 HVAC Drive
Default ID
FW0183V012 2524
2300
HVAC 2525
1114 837
117 838
Description
I/O Configuration (M3.5)
Max Default ID
2502
2503
2504
2505
2506
Description
Software Package (Drive Firmware
Revision String).
Load on control unit CPU.
Name of Application.
Application ID.
Application Version.
for configuration information of
Description
Status of Digital Input 1 Signal
Status of Digital Input 2 Signal
Status of Digital Input 3 Signal
Status of Digital Input 4 Signal
Status of Digital Input 5 Signal
DPD01809
2016-06-07