Bacnet Ip (M5.9.3) - Siemens bt300 Operator's Manual

Chapter 4 - Parameters and Menu Structure
I/O and Hardware (M5)
For either DHCP or Fixed, the following steps must be completed:
1. Select:
Main Menu > I/O and Hardware (M5) > Ethernet (M5.9) > ModBusTCP (M5.9.2) > Common Settings
(M5.9.2.1) > Connection Limit (M5.9.2.1.1) > Edit.
2. Select the desired connection limit.
3. Select:
Main Menu > I/O and Hardware (M5) > Ethernet (M5.9) > ModbusTCP (M5.9.2) > Common Settings
(M5.9.2.1) > Slave Address (M5.9.2.1.2) > Edit.
4. Enter the desired address.
For commanding Run/Stop using BACnet/IP complete the following steps (in addition to the
Monitoring steps above):
1. Select:
Main Menu > Quick Setup (M1) > Ctrl. Place Auto (M1.15) > Edit.
2. Select FieldBusCTRL
For commanding of Speed Reference using BACnet/IP complete the following steps (in addition
to the monitoring steps above):
1. Select:
Main Menu > Quick Setup (M1) > I/O A Ctrl Ref (M1.10) > Edit.
2. Select Fieldbus.

BACnet IP (M5.9.3)

BACnet IP Parameters and Monitoring Values
Ethernet Common Settings (M5.9.1)
Code Parameter
P5.9.1.1 IP address mode
P5.9.1.3 IP address
P5.9.1.4 Subnet mask
P5.9.1.5 Default gateway
P5.9.1.6 MAC address
158 | 180
Siemens Industry, Inc.
Building Technologies
Table 131: Common Settings for BACnet/IP.
Min Max
Siemens BT300 HVAC Drive
Unit Default ID Description
See Ethernet common settings
See Ethernet common settings
Ethernet common settings
See
Ethernet common settings
See
Ethernet common settings
See
DPD01809
2016-06-07
.
.
.
.
.