Toyota Celica 2000 Repair Manual page 196

[ fi ]
y
Ohmmet e r
' h '
No Cont i n ui t y
·-- !
L __
y
y
Bat t e r y
y
SFl VSV FOR CANISTER CLOSED VALVE (CCV)
INSPECTION
1 . REMOVE VSV
INSPECT VSV FOR OPEN CIRCUIT
2.
Using an ohmmeter, check that there is continuity between the
terminals.
Resistance:
At 20 'C (68 'F)
If there is no continuity, replace the VSV.
3. INSPECT VSV FOR GROUND
Using an ohmmeter, check that there is no continuity between
each terminal and the body.
II there is no continuity, replace the VSV.
4. INSPECT VSV OPERATION
Check that air flows from ports A to B.
(a)
� ')<) ';>1 2
Apply battery positive voltage across the terminals.
(b)
Check that air does not flow from ports A to B.
(c)
If operation is not as specified, replace the VSV.
5.
REINSTALL VSV
SF-59
24 0
-·
30