Enabling RADIUS To Auth non-EAP MACs
Make the required changes on the RADIUS server to authenticate non-EAP clients. Apply
changes to RADIUS server using vendor documentation.
RADIUS server configuration error
The RADIUS server requires that the correct MAC address and password for the 3500 Series
device be configured.
Task flow RADIUS server configuration error
The following task flow assists you to configure the RADIUS server with the correct MAC and
password.
Figure 47: RADIUS server configuration error
Configuring MAC and password on RADIUS server
The RADIUS server requires that the MAC address and password for the 3500 Series device
be correct. If it is incorrect, the 3500 Series device may not authenticate.
See the vendor documentation for the RADIUS server for details.
Troubleshooting 5.1
Non-EAP RADIUS MAC not authenticating
February 2013
107