Ftpdl Utility (For Tcp/Ip Networks) - Ricoh G031 Service Manual

3.2.3 FTPDL UTILITY (FOR TCP/IP NETWORKS)

System Requirements
• Windows 3.1x/95/98, Windows NT4.0
• TCP/IP protocol installed
Network Requirements
• The target network interface board (NIB) must have a valid IP address.
NOTE: If the NIB is in the "DOWN" status, this utility cannot be used because
no IP address is assigned to the NIB. Use the "Flashup" utility instead.
Installation
1. Unzip ftpdl.ZIP to a temporary folder (directory). The following files should be
extracted there.
FTPDL.ZIP
File size
--------- ----------
280,481 07-10-96
8,192 09-07-95
668,293 12-21-98
5,984 04-29-96
156,374 12-21-98
5 12-21-98
1,146 12-21-98
44,608 07-24-96
33 12-21-98
64,864 07-31-96
391 12-21-98
226 12-21-98
--------- ----------
1,230,597 bytes
1. Run "Setup.exe" from the folder (directory).
2. Click "Next >" in the "Welcome" dialog box.
3. Read the readme.txt file displayed in the "Readme Information" dialog box, then
click "Next >".
4. In the "Destination Location" dialog box, choose a folder (directory) to install the
software, then click "Next >".
5. Confirm the program folder (group) name, then click "Next >".
6. After the software has been installed, click "Finish" in the "Setup Complete"
dialog box.
SM
Date Time
----------
02:15:12
20:22:40
16:52:20
08:25:22
16:52:06
16:52:20
16:50:54
04:00:00
16:52:10
12:50:10
16:52:04
16:52:20
----------
10-13
FLASH ROM UPDATE
Name
-------------
_INST16.EX_
_ISDEL.EXE
_SETUP.1
_SETUP.DLL
_SETUP.LIB
DISK1.ID
Readme.txt
SETUP.EXE
SETUP.INI
SETUP.INS
SETUP.ISS
SETUP.PKG
-------------
12 files
G031/G032