Power Supply Unit Replacement - Ricoh G031 Service Manual

OTHERS

6.6.6 POWER SUPPLY UNIT REPLACEMENT

1. Remove the control board cover. (Refer to Control Board Cover Removal,
section 6.1.3.)
2. Remove the LD unit. (Refer to LD Unit/Laser Synchronization Detector
Replacement section 6.5.3 for G031, or LD Unit/Polygonal Mirror Motor
Replacement section 6.5.5. for G032.)
3. Remove the printer control board. (Refer to Printer Control Board Replacement,
section 6.6.4.)
4. Remove the bracket [A] (2 screws).
5. Remove the power supply unit [B] (4 screws and 4 connectors).
G031/G032
G031R540.WMF
6-30
[A]
[B]
SM