Ricoh G031 Service Manual page 269

1. Click the Byte Swap button.
2. Select the source file name (eg. P3card.rom) from the file list.
3. Enter the destination file name (eg. P3carddwn.rom).
NOTE: Any destination file name can be used. However, the recommended file
name is XXXdwn.rom. Using a standard naming system such as this
will prevent confusion later.
4. Click Enter then click Exit. In the source file directory, XXXdwn.rom is created
as the byte-swapped file.
SM
COPYING FROM A PC DIRECTLY
A-21
G031X540.PCX
G031/G032