Ricoh G031 Service Manual page 260

USING AN IC CARD
8. Click the "Reference" key and select the firmware file that you wish to download
(eg. P3carddwn.rom).
NOTE: Only a byte-swapped file can be used for the download.
9. Then click the Enter button. The download is started.
• The bar in the download window of the SSU goes
up to 100 %.
• The finishing message is displayed in the Windows
utility.
• When the downloading is finished, a message is
displayed on the printer.
10. Turn the printer off then on, and enter the service
program mode.
11. Print the log print and check the controller firmware version.
12. Return to the user mode.
NOTE: There are two ways to go back to user mode from the service tool mode.
1) Press the " /
the "Escape" key together. Then the initialization will start.
2) Turn the printer off and then on.
G031/G032
" keys together. Then press the "Form Feed" key and
A-12
G031X525.PCX
Downloading Dat
Wait 60
G031X538.WMF
Successfully
G031X536.WMF
SM