Ricoh G031 Service Manual page 258

USING AN IC CARD
Downloading to the IC Card
The firmware can be downloaded either with the Windows SSU utility or using MS-
DOS.
Stinger Service Utility
First, prepare the printer.
1. Turn off the printer.
2. Connect the IC card to the IC card adapter, then connect the adapter to the
option bus connector on the printer control board.
NOTE: G031 has two option bus connectors. The left side connector is used
for the downloading.
Do not turn DIP SW 1 on, or the printer will boot from the IC card.
3. Turn the printer on while pressing the "On Line" key
and "Menu" key together to enter the service tool
menu.
4. Use the "arrow" key to select "Copy to card".
5. Press the "Enter" key then the "Form Feed" key.
G031/G032 A-10
Service Tool
1. Test Print
G031X532.WMF
Stinger Service
3. Copy to card
G031X539.WMF
Please Download
Wating
G031X519.WMF
SM