Ricoh G031 Service Manual page 159

12 March 1999
6.5.2 LASER UNIT/SHIELD GLASS REPLACEMENT
[A]
[E]
Laser Unit
1. Remove the top cover. (Refer to Exterior Cover Removal, section 6.1.1.)
2. Remove the laser unit [A] (4 screws and 3 connectors [G031] or 2 connector
[G032]).
NOTE: 1) Disconnect connectors [B] and [C] first. When connector [D] is
accessible, disconnect it.
2) When removing or re-installing the laser unit, make sure not to
damage the shield glass [E] located just under the unit.
Shield Glass
1. Remove the laser unit as described above.
2. Replace the shield glass [E].
SM
[C]
G031R502.WMF
6-21
LASER UNIT
[F]
[D]
[B]
G031/G032