Ricoh G031 Service Manual page 303

Tech Service Bulletin No. G031/G032/G049/G054 – 009
Page 3 of 3
•
UPDATE 3:
OLD PART NO. NEW PART NO.
G0294175 H3062137
OLD PART NO. NEW PART NO.
G0294175 H3062137
UNITS AFFECTED:
G031/G032 Serial Number cut-in not available at time of publication.
•
UPDATE 4:
PART NO.
G0301393 Support Tray
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
Stripper Pawls – To standardize with other models, the Stripper Pawls
have been changed. The following parts updates are being issued for
all G031/G032 Parts Catalogs. Please update your Parts Catalog with
the following information.
G031 only
Stripper Pawls
G032 only
Stripper Pawls
Support Tray G032– The description for the Support Tray has
changed to Support Tray – G032. The following description change is
being issued for all G032 Parts Catalogs. Please update your Parts
Catalog with the following information.
OLD DESCRIPTION
DESCRIPTION
DESCRIPTION
NEW DESCRIPTION
Support Tray – G032
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
REFERENCE
QTY INT PAGE
5 0 13
REFERENCE
QTY INT PAGE
3 0 11
REFERENCE
QTY PAGE
1 3
ITEM
25
ITEM
21
ITEM
15