Ricoh G031 Service Manual page 286

Tech Service Bulletin No. G031/G032 – 006
Page 3 of 3
•
UPDATE 3:
OLD PART NO. NEW PART NO.
G0294064
G0294116
UNITS AFFECTED:
All G031 printers manufactured after the Serial Numbers listed below will have the Fusing Entrance Guide
and Grounding Plate removed during production.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
FUSING ENTRANCE GUIDE – Toner on the developed paper may become
attracted to the Fusing Entrance Guide, causing some toner to fall onto the
print paper. To prevent this from occurring, the Fusing Entrance Guide and
Grounding Plate are no longer required. The following parts updates are
being issued for all G031 Parts Catalogs. Please update your Parts Catalogs
with the following information.
G031 Only
- Fusing Entrance Guide
- Grounding Plate
MODEL NAME
Gestetner P7020
Ricoh AP200
Savin SLP20
DESCRIPTION
SERIAL NUMBER
P0190700001
P0190700001
P0190700001
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
G031 Only
REFERENCE
QTY PAGE
13
1→0
13
1→0
ITEM
1
45