Main Motor/Gear Box Removal - Ricoh G031 Service Manual

OTHERS

6.6.2 MAIN MOTOR/GEAR BOX REMOVAL

Main Motor
1. Remove the right cover. (Refer to Exterior Cover Removal, section 6.1.1.)
2. Remove the main motor [A] (3 screws and 1 connector).
Gear Box
1. Remove the control board cover. (Refer to Control Board Cover Removal,
section 6.1.3.)
2. Remove the by-pass feed clutch [B]. (Refer to By-pass Feed Roller
Replacement, section 6.4.2.)
3. Remove the main motor. (Refer to Main Motor Removal.)
4. Remove the registration clutch [C] (1 snap ring).
5. Remove the gear box [D] (5 screws).
G031/G032
[B]
6-26
[D]
[A]
[C]
G031R536.WMF
SM