Ricoh G031 Service Manual page 108

SERVICE PROGRAM MODE
Menu Level
Level 1 Level 2
Counter Paper Feed
Clear
Transfer
Roller
Fusing
Error Log &
Counter
EEPROM
Clear
Fusing
Error Clear
Print Log
ROM Engine
Version
Controller
Network
ROM
G031/G032
Paper Feed Views and resets the paper feed
Roller Counter
counter.
& Reset
To view the counter, press the
"Enter" key then press the
"Escape" key.
To reset the counter, press the
"Enter" key again after the counter
is displayed.
Transfer Roller Views and resets the transfer roller
Counter & counter.
Reset
To view the counter, press the
"Enter" key then press the
"Escape" key.
To reset the counter, press the
"Enter" key again after the counter
is displayed.
Fusing Counter Views and resets the fusing
& Reset counter.
To view the counter, press the
"Enter" key then press the
"Escape" key.
To reset the counter, press the
"Enter" key again after the counter
is displayed.
Error Log/ Views and resets the error log list
Counter & and the error log counters.
Reset
To view the log and counters,
press the "Enter" key then press
the "Escape" key.
To clear the log and counters,
press the "Enter" key again after it
is displayed.
Memory All Resets all software counters. Also,
Clear on Engine resets all adjustment settings and
Control Board log entries.
Normally, this service mode
should not be used.
Clear the Fuser Resets a fusing unit error.
Error
Prints the print log
To print the log sheet, select the
tray using the "
press the "Enter" key.
See the "Print Log" section for
details.
ROM Version Displays the Engine Control Board
Display (ECB) ROM version.
F/W Version Displays the main printer control
Display (Main board firmware version.
Control Board)
NIB Firmware Displays the NIB firmware version.
version Display
4-6
Function
8 9
/ " keys then
Settings
Up to ten errors
are registered.
These are the
same as the
'Error Logging'
entries on the
Print Log.
SM