Ricoh G031 Service Manual page 278

&900)8-2#291&)6U
%440-'%&0)#13()0U
####+)78)82)6#h#4KNEH
####6-'3,#h#%4EHNN
####7%:-2#h#704EH
SUBJECT: PARTS CATALOG UPDATES
•
UPDATE 1:
OLD
PART NUMBER
REV
G0325720
OLD PART NO. NEW PART NO.
G0315941
UNITS AFFECTED:
G032 serial Number cut-in not available at time of publication.
•
UPDATE 2:
OLD PART NO. NEW PART NO.
G0293854
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
RICOH GROUP COMPANIES
8)',2-'%0#7)6:-')#&900)8-2
+NGEf+NGF#g#NNG
MAIN CONTROL BOARD - The Font ROM on the Main Control Board is no
longer used. The font data will be kept on the Code ROM. The following parts
updates are being issued for all G032 Parts Catalogs. Please update your
Parts Catalogs with the following information.
NEW
REV
J K Main Control Board
IC – MSM27C1602CZ-NGS-K
COMPRESSION SPRING – Please correct the part number of the
Compression Spring for the By-Pass Feed section. The following part
correction is being issued for all G032 Parts Catalogs. Please update your
Parts Catalogs with the following information.
G0303862 Compression Spring
DESCRIPTION
DESCRIPTION
DESCRIPTION
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
NLfGNfMM
REFERENCE
QTY INT PAGE ITEM
1 0 15 15
REFERENCE
QTY PAGE ITEM
1¤0 19
REFERENCE
QTY PAGE ITEM
1 7 23
CONTROL NO. 051
2