OVERVIEW
1.1.2 PC, VIA PARALLEL PORT
At the customer site, new firmware can be downloaded to the printer from a PC via
a parallel cable using either the DOS copy /b command or the Stinger downloading
utility.
1.1.3 DIMM
First, the new firmware must be stored on an 8 MB DIMM. This is done by copying
the firmware from a PC to a DIMM plugged into a G032 or G032 printer via a
parallel cable, using either the DOS copy /b command or the Stinger downloading
utility.
Then, the IC card is taken to the customer's premises, and downloaded using a
service mode.
The DIMM card is available as a service tool.
G031/G032
Parallel Cable
IBM Compatible
AT THE CUSTOMER'S PREMISES
Parallel Cable
IBM Compatible
AT THE SERVICE STATION
AT THE
CUSTOMER'S PREMISES
Printer
DIMM Slot
Printer
DIMM Slot
Printer
DIMM
G031X553.WMF
A-2
G031X551.WMF
DIMM
G031X552.WMF
SM