Ricoh G031 Service Manual page 229

Firmware Update Procedure
1. Login to the NetWare network as "supervisor" or a user with supervisor
privileges.
2. Start the FlashUP utility.
3. Choose a new firmware file and click "OK".
4. Choose a network interface card (or multiple cards) from the unit names listed
in the dialog box, then click "OK". The update will start.
5. If you do not see the desired unit in the list, click "Show All" to display all
network interface cards that are currently logged in to the server.
If you still cannot see the unit, click "Cancel", restart the machine (printer), and
try again.
SM 10-11
FLASH ROM UPDATE
G031/G032