Operator Errors; Troubleshooting - Ricoh G031 Service Manual

7. TROUBLESHOOTING

7.1 OPERATOR ERRORS

Function
Front Cover Open
Paper Size Error
Paper Misfeed
Toner Cartridge Installation Error
Fusing Unit Installation Error
Maintenance Kit Replacement Time
Tray Installation Error
Paper End
Paper Tray Error
Memory Overflow
Print Overrun
Hard Disk Error
Network Interface Board Error
RS232C Board Error
Memory Unit (SIMM) Error
Right Optional Board Error
Left Optional Board Error (Stinger-P3 only)
NOTE: XX, indicates that paper tray or paper size is variable.
Front Cover Open
Message:
Close Front Cover
Definition:
The front cover is open.
Reset Method:
Close the front cover.
Paper Size Error
Message:
Check Paper Size Tray XX
Definition:
The paper size setting of the tray differs from the actual paper size in the tray.
Reset Method:
• Pull out the paper tray and check the paper size setting then put the tray
back.
• Press "Enter" and load the correct size of paper into the tray.
SM
OPERATOR ERRORS
Error Message
Close Front Cover
Check Paper Size Tray XX
Remove Misfeed Front Cover & Tray
Remove Misfeed Open Front Cover
Replace Toner Cartridge
Replacing Fusing Unit
Replace Maintenance Kit
Install Tray XX
Tray XX: Add paper
Load Tray XX: {paper size}
Load By-pass Tray XX: {paper size}
Memory Overflow
Print Overrun
Error SC 2600
Error SC 2700
Error SC 2900
Error SC 3100
Error SC 3200
Error SC 3201
7-1 G031/G032