PAPER FEED
2.5.2 PAPER TRAY
G031
Tray Extension
The tray can be extended manually
to hold paper longer than A4/Letter
size. The default setting of the tray
length is for short paper. To use
longer paper, release the catches
[A] at both sides, then extend the
tray and re-lock the catches.
The paper sizes in the table given
below can be used.
Tray mode
Short
A5 Landscape, B5 Landscape, A4 Landscape, 7
(default)
8
" x 11" Landscape, 8
1/2
8
" x 13" Portrait, 8" x 13" Portrait, 8
1/2
Long
Portrait, B4 Portrait, A3 Portrait, 11" x 17" Portrait
Bottom Plate Lift
The tray bottom plate [B] is connected
to the cassette arms [C] by springs
[D]. When the cassette is put in the
machine, the slopes of the guide
blocks [E] on the machine lift the
cassette arms up and the springs
keep the stack of paper at the correct
height. When the paper is used up,
the springs pull the tray bottom plate
up as shown in the picture.
G031/G032
[A]
Possible Paper Sizes
" x 11" Portrait, A4 Portrait
1/2
" x 13" Portrait, 8
1/4
2-20
G031D516.WMF
" x 10
" Landscape,
1/4
1/2
" x 14"
1/2
[E]
[D]
[B]
G031D517.WMF
[C]
SM