Ricoh G031 Service Manual page 273

9. Then click the Enter button. The download starts.
---- wait for a few minutes ----
During this period, the printer display is as shown.
• The bar in the download window of the SSU goes up to 100 %.
• The finishing message is displayed.
• When the download is finished, the printer display is
as shown.
10. Turn the printer off then on, and enter the service mode.
11. Print the log print and check the controller firmware version.
12. Return to the user mode.
NOTE: There are two ways to go back to user mode from the service tool mode.
1) Press the " /
the "Escape" key together. Then initialization will start.
2) Turn the printer off and then on.
SM
" keys together. Then press the "Form Feed" key and
A-25
COPYING FROM A PC DIRECTLY
Downloding Data
Wait 60
Successfully
G031X535.WMF
G031X536.WMF
G031/G032