Polygonal Mirror Motor Replacement - Ricoh G031 Service Manual

12 March 1999 LASER UNIT

6.5.4 POLYGONAL MIRROR MOTOR REPLACEMENT

G031
[B]
[A]
[C]
G031R504.WMF
NOTE: When doing the following steps, take care not to damage the mirror surface
with the tip of the screwdriver.
1. Remove the top cover. (Refer to Exterior Cover Removal, section 6.1.1.)
2. Remove the laser unit top cover [A] (5 screws and 1 grounding plate [B]).
3. Replace the polygonal mirror motor [C] (4 screws and 1 connector).
SM 6-23 G031/G032