Ricoh G031 Service Manual page 266

USING A DIMM
12. Then click the Enter button. The download is started.
• The bar in the download window of the SSU goes
up to 100 %.
• The finishing message is displayed in the Windows
utility.
• When the downloading is finished, a message is
displayed on the printer.
13. Turn the printer off then on, and enter the service mode.
14. Print the log print and check the controller firmware version.
15. Turn the printer off and then on to return to the user mode.
The DIMM card now contains new firmware. The following procedure explains how
to install the new firmware into the printer's flash memory.
G031/G032 A-18
Rev. 04/2000
Downloading Dat
Wait 60
G031X538.WMF
Successfully
G031X536.WMF
SM