Ricoh G031 Service Manual page 110

SERVICE PROGRAM MODE
Menu Level
Level 1 Level 2
Serial
Number
Note:
1. The serial number is stored in the NVRAM on the controller
board.
2. The printer ID is checked during font downloading.
3. Store the same number when the NVRAM is cleared with the IC
card boot menu.
4. The product number of the controller board is used as the printer
ID and stored in the factory.
See the "Printer ID" section how to store the serial number.
Diag.
Clear
G031/G032
Printer ID Views and stores the printer ID
Setting
To view the printer ID, press the
"Enter" key.
Normally, the printer ID should
not be changed.
Diagnostic Error Clear the diagnostic error log.
Log Clear
To clear the log, press the "Enter"
key.
4-8
Function Settings
SM