Ricoh G031 Service Manual page 152

PAPER FEED
G032
[A]
[B]
G031R518.WMF
1. Remove the front cover. (Refer to Front Cover Removal, section 6.1.2.)
2. Remove the by-pass feed roller cover [A], as shown.
NOTE: 1) First, unhook the left rear hook [B].
2) When re-installing the by-pass feed roller cover, make sure that the
sensor [C] and connector [D] are connected together and attached
to the frame, as shown.
3. While unhooking the hooks [E], remove the by-pass feed roller [F], as shown.
NOTE: 1) Do not touch the by-pass feed roller with your bare hands.
2) While pushing the gear [G] towards the inside of the mahcine, re-
install the by-pass feed roller.
G031/G032
[D] [C]
[E]
[F]
6-14
[G]
G031R519.WMF
SM