12 March 1999
COVERS
6. REPLACEMENT AND ADJUSTMENT
6.1 COVERS
6.1.1 EXTERIOR COVER REMOVAL
[A]
[D]
[C]
[B]
G031R507.WMF
G031
1. Remove the fusing unit. (Refer to Fusing Unit Replacement, section 6.2.1.)
2. Remove the top cover [A] (two screws).
3. Pull the hook [B] towards the outside, then remove the left cover [C] (1 screw).
4. Slightly shift the right cover [D] towards the rear, then remove it (1 screw).
G032
NOTE: Before removing the exterior covers, remove the printer from the paper
feed unit (if the optional paper feed unit is installed).
1. Remove the fusing unit. (Refer to Fusing Unit Replacement, section 6.2.1.)
2. Remove the top cover [A] (two screws).
3. Slightly pull out the paper tray.
4. Remove the left and right covers [B, D] (1 screw each).
SM
6-1
G031/G032