Ricoh G031 Service Manual page 144

FUSING UNIT
G031R512.WMF
6. Remove the two screws [A] securing the terminals.
7. Replace the fusing lamp [B].
NOTE: Do not touch the fusing lamp with your bare hands.
8. Replace the hot roller [C] (1 C-ring [D] and 1 gear [E]).
NOTE: 1) Be careful not to scratch the hot roller with the stripper pawls.
2) Do not touch the hot roller with your bare hands.
3) When re-installing the hot roller, make sure that the bushing [F] is in
the correct place, as shown.
G031/G032
[F]
[B]
[C]
[A]
6-6
[D]
[E]
G031R547.WMF
SM