Ricoh G031 Service Manual page 337

Tech Service Bulletin No. G031/G032/G049/G054 – 018
OLD PART NO. NEW PART NO.
G0302551
OLD PART NO. NEW PART NO.
G0302553
OLD PART NO. NEW PART NO.
G0302703
G0302570
NOTE 1: This modification is applied only to service parts.
NOTE 2: When installing either the new paper cassette or new base plate assembly for the first time, it is
necessary to install them together as a set.
NOTE 3: The diameter of the holder on the paper cassette has been increased from 4 mm to 6mm.
NOTE 4: The diameter of the opening on the base plate assembly for the cassette holder has been
increased from 4mm to 6mm in accordance with the above change.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
G032 only
G0302541 Paper Cassette Ass'y
G054 only
G0302543 Paper Cassette Ass'y (G054)
G032/ G054
G0302704 Paper Cassette
G0302582 Base Plate Ass'y
DESCRIPTION
DESCRIPTION
DESCRIPTION
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
REFERENCE
QTY INT PAGE ITEM
1-1 1 5
REFERENCE
QTY INT PAGE ITEM
1-1 1 5
REFERENCE
QTY INT PAGE ITEM
1-1 3/S 5
1-1 3/S 5
Page 2 of 2
1
1
9
3