Energy Saver Mode - Ricoh G031 Service Manual

IMAGE FUSING

2.6.9 ENERGY SAVER MODE

When the machine is not used, the energy saver feature reduces power
consumption by switching off the fusing lamp.
Entering Energy Saver Mode
Energy saver mode starts after the machine has been idle for a certain time. This
time is specified by the user. The following choices are available.
• Off (energy saver mode never activates)
• 15 minutes
• 30 minutes (default)
• 1 hour
• 2 hours
• 3 hours
This feature is adjusted using the Job Control menu at the printer's operation
panel.
NOTE: When the machine is in energy saver mode, the CPU turns off the fusing
lamp. Therefore, the time from the print start command to the start of
printing is longer than in normal standby mode.
Leaving Energy Saver Mode
The machine leaves energy saver mode when one of the following happens.
• Print command received from the PC
• Front cover opened and closed
• Paper tray pulled out and replaced
• Any operation panel keys pressed
G031/G032 2-36 SM