Rotor Bearing Replacement; Rectifier - Honda GL1800 Service Manual

RECTIFIER

See the wire diagram on page 17-2 for terminal
locations.
Check for continuity in each direction between:
– B and P terminals
– E (ground) and P terminals
All diodes should have continuity in only one
direction.
If any of the diodes fail, replace the regulator/
rectifier assembly.

ROTOR BEARING REPLACEMENT

Remove the front and rear rotor bearings using a
bearing puller.
Drive a new front bearing onto the rotor shaft using
Be sure to center
the special tools.
the attachment
with the bearing.
TOOLS:
Driver, 22 mm I.D.
Attachment, 20 mm I.D.
Drive a new rear bearing onto the rotor shaft using
the special tools.
TOOLS:
Driver
Pilot, 20 mm
RONT BEARING
REAR BEARING
07746-0020100
07746-0020400
RONT BEARING
07749-0010000
07746-0040500
BATTERY/CHARGING SYSTEM
2 2
BEARING PULLER
EA BEA ING
2 -
DRIVER
ATTACHMENT
D IVE
PILOT
17-15