Honda GL1800 Service Manual page 193

FUEL SYSTEM (Programmed Fuel Injection)
Cover the sealing bolt with a rag or shop towel.
Remove the sealing bolt to relieve the fuel pressure.
Remove the two bolts and radiator stay.
Disconnect the injector connectors.
Left side: Remove the four bolts, fuel feed hose joint
and pressure regulator stay from the fuel rail.
Right side: Remove the four bolts and fuel feed hose
joints.
5-62
BOLT
EALING BOLT
RADIATOR TAY
ONNE TORS
EED HOSE JOINT
PRESSURE REGULATOR STAY
BOLTS
EED HOSE JOINTS
BOLTS