Honda GL1800 Service Manual page 405

Hide thumbs Also See for GL1800:

Table of Contents

FRONT WHEEL/SUSPENSION/STEERING

Install the handlebar setting plate and tighten the

Route the wires

and hose properly

(page 1-23).

Place the left handlebar onto the top bridge and

align the bolt holes securely, then install the handle-

bar mounting bolts and tighten them to the speci-

fied torque.

TORQUE: 26 N·m (2.7 kgf·m, 20 lbf·ft)

Install the clutch master cylinder and holder.

Align the end of the master cylinder with the punch

mark on the handlebar, and tighten the upper bolt

first, then the lower bolt.

TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)

Connect the clutch switch connectors.

Connect the clutch cruise switch connectors.

Install the holder cap onto the clutch master cylin-

der holder bolts.

Troubleshooting