GENERAL INFORMATION
STANDARD TORQUE VALUES
FASTENER TYPE
5 mm bolt and nut
6 mm bolt and nut
8 mm bolt and nut
10 mm bolt and nut
12 mm bolt and nut
ENGINE & FRAME TORQUE VALUES
• Torque specifications listed below are for important fasteners.
• Others should be tightened to standard torque values listed above.
1. Apply oil to the threads and seating surface.
2. Apply grease to the threads.
3. Apply locking agent to the threads.
4. Apply sealant to the threads.
5. Apply brake fluid to the threads.
6. Lock nut: replace with a new one and stake it.
7. ALOC bolt or screw: replace with a new one.
8. One-way bolt: replace with a new one.
9. Left-hand threads.
10.U-nut.
ENGINE
MAINTENANCE
ITEM
Spark plug
Timing hole cap
Engine oil filter cartridge
Engine oil drain bolt
LUBRICATION SYSTEM
ITEM
Oil pressure switch
Oil strainer bolt
Oil pump assembly bolt
FUEL SYSTEM (Programmed Fuel Injection)
ITEM
Fuel hose joint bolt
Fuel rail mounting bolt
Pressure regulator nut
Pressure regulator stay bolt
Fuel rail banjo bolt
Sealing bolt
PAIR check valve cover bolt
Knock sensor
Engine coolant temperature (ECT) sensor
O
sensor
2
1-12
TORQUE
N·m (kgf·m, lbf·ft)
5 (0.5, 3.6)
5 mm screw
10 (1.0, 7)
6 mm screw
22 (2.2, 16)
6 mm flange bolt
(8 mm head, small flange)
34 (3.5, 25)
54 (5.5, 40)
6 mm flange bolt
(8 mm head, large flange)
6 mm flange bolt
(10 mm head) and nut
8 mm flange bolt and nut
10 mm flange bolt and nut
Q'TY
6
1
1
1
Q'TY
1
1
3
Q'TY
6
6
1
2
1
1
12
2
1
2
FASTENER TYPE
THREAD
TORQUE
DIA. (mm)
N·m (kgf·m, lbf·ft)
14
18 (1.8, 13)
45
18 (1.8, 13)
20
26 (2.7, 20)
14
34 (3.5, 25)
THREAD
TORQUE
DIA. (mm)
N·m (kgf·m, lbf·ft)
PT 1/8
12 (1.2, 9)
6
12 (1.2, 9)
6
13 (1.3, 9)
THREAD
TORQUE
DIA. (mm)
N·m (kgf·m, lbf·ft)
6
10 (1.0, 7)
6
10 (1.0, 7)
18
27 (2.8, 20)
6
10 (1.0, 7)
12
33 (3.4, 25)
6
12 (1.2, 9)
5
5 (0.5, 3.6)
12
31 (3.2, 23)
12
25 (2.5, 18)
12
25 (2.5, 18)
TORQUE
N·m (kgf·m, lbf·ft)
4 (0.4, 2.9)
9 (0.9, 6.5)
10 (1.0, 7)
12 (1.2, 9)
12 (1.2, 9)
26 (2.7, 20)
39 (4.0, 29)
REMARKS
NOTE 2
NOTE 1
REMARKS
NOTE 4
NOTE 3
REMARKS