Honda GL1800 Service Manual page 279

Hide thumbs Also See for GL1800:

Table of Contents

CYLINDER HEAD/VALVE

Apply molybdenum oil solution to the camshaft

journals, thrust surfaces and cam lobes.

Install the camshaft while installing the cam chain

Be careful not to

onto the cam sprocket in its proper location so that

the timing marks on the sprocket are flush with the

cylinder head and

cylinder head surface. Make sure the "M" mark is

facing in and the rear end cam lobe is facing out.

Make sure the guide rails of the cam chain

tensioner and guide are positioned over the cam

chain properly.

Troubleshooting